BS-10 Wet cable wire separator machine
Water recycling granulator machine Technical data :
Machine weight: 800KG
Power: 8.15KW
Voltage:110V,220V,380V,460V
Processing diameter: below 20mm
Machine size: L2700*W1400*H1800
Production: 60~120KG/H
1 : Hopper 2 : Crusher 3 : Vibration Table
4 : Water Pump 5 : Control Box
Wet cable wire crusher and separator machine Specification
1 : All of oil hole must be filled with mechanical butter before operation (once a week)
2 : The water tank must be filled with water
3 : Press the power buttons in the following sequence: water pump/segregating unit/grinder.
From the left to the right is :
Crusher – separator – water power unit - reserved
Feed water level regulation
1 : Adjust the water level according to the quantity of PVC/rubber particles and copper particles on
the separator plate.
2 : If there are more PVC/rubber particles in copper particles, the water level could be appropriately adjusted higher.
3 : If the PVC/rubber particles don’t go up with copper particles together, the water level could be
appropriately adjusted lower.
The way to replace the screen
1 : Replacing the screen is aimed to increase working efficiency, separating the PVC/rubber particles and copper particles completely.
2 : When replacing the screen, firstly, open the right cover of the grinder; then, loosen the screw of screen to remove it; finally, put the ideal screen into it.
3 : Replacing the screen according to the wire diameter (communication wire: Φ2-2.5mm;
electric wire: Φ2-2.5mm;other wire: Φ3-5mm)
4 : Adjustment of the screen: The ideal distance between the screen and the rotary cutter is about 1mm.
The way to sharpen knives of water granulator and separator machine
1 : Rotary cutter: Sharpen it by grinder and hold the blade at the ideal 15 degrees. ( No need to
remove the blade).
2 : Stationary knife: Sharp it by grinder or grinding machine after removing the stationary knife.
3 : Knife adjustment: The ideal distance between rotary cutter and stationary knife is about 0.2mm.
- Buy BS-10 Wet cable wire separator machine for sale,price,BS-10 Wet cable wire separator machine exporter/importer,suppliers,factory,manufacturers in China.
- bs-011 rottami di filo di rame - macchina utilizzata per il riciclaggio cavo
- bs-600tm granito cutter la macchina tagliatrice concrete
- elettrotreno
- bs-10 bagnato cavo separatore machine
- riciclaggio dei rifiuti elettronici macchine mini bs-400
- mr-p demolizione motore elettrico industriale dello statore macchina per il riciclaggio
- bs-010 durevoli utilizzati cble filo taglio e rimuovere la macchina
- bs-005 automatico filo sbucciare macchina per il riciclaggio
- bs-015m filo spogliarellista machine